Cleaning a water tank can be a difficult process, especially if the tank is full of water. This article informs you how to clean your water tank without removing any of the water in it!
How To Clean Your Home’s Water Tank – Two Methods –
How to clean a tank? – 1
Unwanted bottles or waste bottles can be used for this purpose. The bottle must be cut from the top side and that half portion must be cut with scissors into small cuttings at the edges.
Edges must be in the form of a brush and the top must be removed from the bottle 1m in width and 1m in length PVC pipe must use for this.
The edge of the pipe and top of the bottle must be inserted into each other. As of the same size, the PVC pipe must be heated to the edge for contraction of the pipe and the bottle top must be inserted into it. To be tight insulation tape must be wrapped above it.
A water hose is a next item needed for this purpose. The edge of the hose must be inserted into the PVC pipe it may be a little loose. For been tight hose can be wrapped with tape and inserted into the pipe.
Two edges can be closely and tightly wrapped with tape to be air-tight. Now the first procedure is completed. The second step is cleaning, by tightening the air in the pipe and inserting the bottle end all dirt particles will be entered into the PVC pipe.
By this method, dirt particles can be easily removed to a great extent.
The main benefit of this amazing idea is low cost is only needed for this. Low-cost products with simple techniques make our water tank super clean. disease-free environment can be created by this cleaning process.
How to clean a tank? – 2
Cleaning water tanks is a necessary task for any business or home. However, many people do not know how to do it without removing the water. This is because many companies sell products that require the tank to be removed. Today, we are going to show you how to clean a water tank without removing the water using a plunger and a bucket.
- Step One: Fill a bucket with enough cold water to cover the bottom of the tank.
- Step Two: Place the plunger over the top of the bucket and insert it into the tank.
- Step Three: Push and pull the plunger up and down to move the water around in the tank.
- Step Four: When the water begins to become dirty, lift out the plunger and pour the dirty water into the bucket.
- Step Five: Repeat steps two through four until all of the water in the tank has been cleaned.
If you are looking for a way to clean your water tank without having to remove the water, then you may want to consider using a pressure washer. By using a high-pressure spray, you can easily and quickly clean the surface of your tank without having to deal with any of the hassle and mess that comes with removing the water.