Today we are going to explain about the preparations and procedures for starting a PVC conduction manufacturing business or a wiring pipe manufacturing business. ( മലയാളത്തിൽ ഈ ലേഖനം വായിക്കാൻ ഇവിടെ അമരത്തു )
PVC pipes are used for wiring and plumbing. In addition, there are many other PVC products. The most commonly used of these are PVC wiring pipes.
To start a PVC conduit pipe manufacturing plant, machinery is required. Either the reahola reel can be used to make yamrilaha or the seyahala reel can be used to make yamrilaha.
Two types of pipes can be made using this construction method. We can manufacture PVC pipes with ISI seal as well as ordinary PVC conduit pipes. It is better to use masonry material to manufacture ISI sealed PVC pipes.
Extrusion process is the process for making PVC conduit pipe. Not a single place without an electric connection can be seen during this period. PVC pipes are used for electrical works.
|For Latest Jobs||Apply Now|
PVC pipes are the most widely used in a country like India.
These are available in a variety of colors and locations
Its demand is different. The most commonly used of the PVC pipes are white and black. Ivory colored ones are also produced in large quantities.
Here we introduce today a factory like this
It’s about starting machines, investing, licensing procedures, and profit and loss.
Next we will talk about machines for PVC conduit manufacturing business. As we mentioned above, PVC pipes can be made using two types of machines.
Double screw extruder machine
The machinery required for this is a mixer machine, extrusion machine, cooling tank, traction machine and cutter machine. If we use a double screw machine for the wiring pipe, we have to use either virgin material or pulverized powder material. You will also need a Pulverize machine.
The double screw machine is for ISI seal pipe construction
We have already said that it is the most suitable. Great big
These ISI-stamped pipes are used in projects and government building construction.
Similar products are also used for electrical work on concrete roofs.
All dual screw machines available in the market today are fully automatic. That is, for example, if we invest a copper in this machine, we get it as a fully manufactured product.
The AC drive is used to control the speed of both the machines. It is also a fully automatic machine and has a computerized speed controller.
Single screw machine
Typical pipes i.e. 65 or more barrels
Single screw machines are best for making sized PVC pipes. With this machine we can make pipes with just scrap.
As stated above, this set contains 4 machines. Mixer, extrusion, traction and cutter. Manual cutter and automatic cutter are used for cutting. Contact the following address to purchase high quality cutter machine.
Investment for PVC Pipe Manufacturing Unit
The typical investment for starting a PVC manufacturing unit is a building, machines, electricity connection and paper clearance. The building should be such that the machines can be installed. There should be space in the building to store raw materials as well.
The intended building should be at least 20 m long and 15 m wide. The cost of construction depends on the materials used in the construction. The building is usually constructed of single pipes and single sheets. If the person intends to construct the building on his own land, he must maintain a distance of at least 10 meters if the land is close to someone else’s land. Either that or it would be hard to get the chow.
The building, which is 20 meters blue and 15 meters wide, will require at least 3600 square feet. If such a building is to be constructed using a single sheet and pipe, it will cost around Rs. 9 lakhs per square foot at a cost of Rs. 250.