Unit Systems used in civil engineering and their importance.

Spread the love

Unit Systems used in civil engineering and their importance. Units are an area of ​​great importance in civil engineering. It can only be applied to real projects. if the dimensions are accurately understood. Understand what different units, are and when they should be used.

The units to be applied in each area will be. Therefore one should have accurate knowledge about each unit. And its use in civil engineering can be accurately understood. Unit Systems used in civil engineering and their importance are a major part.

Thus learn the units in a simple way. Most importantly apply the units in properly. Because of the basics learn thoroughly it will be more useful in future. Therefore learn and understand each unit accordingly.

What are the unit systems used in civil engineering?

There are two main types of unit systems used in civil engineering. They can be categorized as Metric System and Imperial System. The standard measurements are millimeters, centimeters and meters are all metric systems. Such units are used to measure room and space.

The Imperial unit system includes dimensions such as feet and inches. The Metric Unit System is officially approved in India. But the Imperial unit system is used in countries like Europe. However, both systems are now used in India as part of colonial culture. Each unit is interconnected.

Importance of SI UNITS and uses in civil engineering

  • One foot is 30.48 cm in centimeters.
  • One meter is 3.28 feet. Just look at the scales on the 30 to remember this.
  • One square meter is 10.76 square feet.
  • One cubic meter is 35.31 cubic feet.

You need to know this value to convert from meter to centimeter and centimeter to meter. The SI unit needs to know how many square feet a cent is. Thus should be aware of the measurement correctly. Because of the calculation fault makes a lot of problems.

Area and related measurements in civil Engineering

  • One cent is equal to 40.46 square meters.
  • It can be used to measure a cent space.
  • That is, to calculate the size of a square shale plot, simply multiply its length by its width.
  • One acre is 100 cents. Hector means 100 ARES combined.
  • That is 10,000 square meters per hector.

Force is usually detected using a Newton unit. But often many people do not know how much a Newton is. One Newton is 0.101 kg. One kilogram is the mass. Newton calculates based on this.1 kg equals 9.81 N. But a Newton is said to be .101 Kg.

All you have to do is take a packet of 100g mustard from the shop and took in hand with easy understanding. It helps to understand how much a Newton is. Therefore use each measurement accurately. When a study in a simple way makes learning easy.

Different categories of civil engineering

  • construction and management field.
  • Geotechnical.
  • water and architecture.
  • Structural part.

Of course, students studying civil engineering need to understand such measurements accurately. Trying to see these as visualization will make learning easier. Besides these are important. For more watch, the video is given below. It will definitely be helpful for architecture students. Because sometimes they make confusions in children.

Spread the love

Leave a Comment